Salicru ILUEST NE Série Manuel D'installation Et D'opération page 30

• RE2 series
• Triac
• Taps
• Indoor
Automatic voltage stabilizer for industrial applications that SALICRU developed
and it was world-wide patented in the seventies.
The triac is a semiconductor with three pins, and it is used to control the average
current flow toward the load, with the particularity that it is trigered in both senses
and it can be blocked by both reverse voltage and if the current is lower than the
maintenance value. Never mind the gate polarisation, the triac can also be triggered,
it means that the current gate can be positive or negative.
Each one of the contacts extracted in the secondary of the input autotransformer of
the equipment.
Name used to describe the enclosure location into an existent board or control
centre.
- 30 -