Mains Connection - Skandika ADRETT Instructions De Montage Et Mode D'emploi

Step 6
Loosen the screws (09) from the decorative covers for pedal tube joint (34/35) & (37/38).
Attach decorative cover for pedal tube joint (34/35) to left pedal tube (03L) and secure with screws (09). The
covers (37/38) need to be fixed on the right pedal tube (03R).
Fix decorative cover (27/32) on left lower handlebar (04L) and cover (28/33) on right lower handlebar (04R)
as shown.
CHECK IF ALL BOLTS AND NUTS ARE
TIGHTENED BEFORE USING THE DE-
VICE!

Mains connection

The computer gets its power supply by the included adaptor (15).
The adaptor will be connected to a normal mains plug (European standard,
please check the specifications resp. please use a fitting mains adaptor for your power system).
If you have to buy a new adaptor it is important to pay attention that it is GS approved and
corresponds to the product safety law.
Don't use another electricity supply because this could cause damages or impairments of functions.
36