Gamko Noverta Mode D'emploi page 38

3.
4. To change the SET value push the o or n arrows within 10 sec.
5. To memorise the new set point value push the SET key again
or wait 10sec.
XR07CX for GM2/2 and GM2/22.
To see the set point.
1. Push the SET key two times, the set point will be showed.
2. Push the SET key three times to return to normal visualisation.
To change the set point
1. Push the SET key for more than 2 sec and then push the SET key
again;
2. The value of the set point will be displayed and the "°C" LED starts
blinking;
3. To change the Set value push the UP or DOWN button;
4. To memorise the new set point value push the SET key three
times.
38
User Manual