Ayce JHS-A0012 Manuel D'utilisation page 36

13. Don't put the machine on a place with water or other
liquid.
14. If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent, or similarly
qualified person, in order to avoid a hazard.
15. Don't spatter water or oil into machine.
16. Don't put hard objects between fan blades.
17. Don't repair the machine by yourself. Dealing with
problems by non-professional person may cause
danger, even power cord replacement must be done
by professional electrician.
18. Only use accessories from suppliers, otherwise
danger and damages of the machine may be caused.
19. Place the machine on flat ground, and keep it far
from around things at least 50cm.
20. Make sure the socket can be reached from machine
location.
21. Keep the machine stand upright so that compressor
can work well.
22. Don't run the machine near to gasoline or any other
flammable liquids.
23. Make sure free access of air-inlet and air - outlet.
24. Don't use spraying agent (such as pesticides, paint)
or other flammable materials, otherwise plastic
deformation, or even electric damage of the machine
may be caused.
25. Make sure no damage in plug.
Don't use connector instead of plug.
26.
27. Insert plug into socket first, press key "POWER" to
run machine.
28. Warning: before using the portable air conditioner,
keep it upright for at least two hours.
29. After the air conditioning is installed, ensure that the
power plug is intact and firmly plugged into the
power outlet, and place the power cord orderly to
prevent someone from being tripped or pulling out
the plug.
30. Be aware that refrigerants may not contain an odour.
31. Warning: Appliance shall be installed, operated and
stored in a room with a floor area larger than 11 m².
Any person who is involved with working on or
32.
breaking into a refrigerant circuit should hold a
current valid certificate from an industry-accredited
assessment authority, which authorises their
competence to handle refrigerants safely in
accordance with an industry recognised assessment
specification.
33. Servicing shall only be performed as recommended
by the equipment manufacturer. Maintenance and
repair requiring the assistance of other skilled
personnel shall be carried out under the supervision
of the person competent in the use of flammable
refrigerants.
34. All working procedure that affects safety means
shall only be carried by competent persons.
70 | 71 GB