Dovre 750 GH Mode D'emploi Et Installation page 30

When all of the above advice is heeded, you will be able to fully enjoy your stove.
Door adjustment:
The door is fully adjustable to ensure air tightness and correct
alignment.
To make adjustments, use the following procedure.
Loosen the two hex headed screws located on the right outside
front of the firebox. To achieve a tighter door seal, the a d-
jusable hinge plate may be moved forward or backward fom
the top and/or bottom. Horizontal adjustment can be made
firstly by loosing the two hax headed screws. Tightening the
top screw will raise the door if it sags and does not latch
smoothly. Loosening the top screw will lower the opposite adge
if the door is too high. Adjusting both set screws wil re -
position the door to the left or right for correct alignment. Af-
ter adjustments have been made, tighten the two hew headed
screws on the hinge plate, taking care not to over tighten. The
door latch may be adjusted in a similar manner.
Removing the baffle plate:
The fire plate is fixed onto the back plate of the stove with one bolt, visible from
the outside. After having removed this bolt, you can easily take the fire plate out
of the stove. Eventually remove the refractory stones first.
30
750GH - 750GM 03.27885.100