Getting Started - SXT Scooters 1000 XL EEC Notice D'utilisation

GETTING STARTED

6. Remove the battery, open the protective bag
and snap the fuse into the slot. Do not hesitate to
press hard with your thumb to get the fuse.
7. Place the battery into the slot in the plastic
platform and connect.
8. Insert the seatpost into the slot and snap the
saddle and tighten the ring
clamping. IF your clamping ring seems too small,
do not hesitate to deviate a little so it fits more
easily.
9. Put the saddle on the seat pole and tighten the
nuts on both sides by using the tools included.
10. Check all screws before the first departure
SXT (screw brakes, fork, suspension ect).
6
instuctions sxt-scooters