Publicité
Les langues disponibles
Les langues disponibles
The cable length must be of sufficient length to allow for 3 windings to remain on the drum when in the lowest
position.
The cable mounting is done by means of the fixed cable clamp.
3.4. Before use
To enable the load pressure brake to function correctly, the winch
must carry a minimum load of approx. 20% of the nominal load.
3.5. Operating
The winches are suitable for manual operation only.
For the load to be hoisted, turn the crank clockwise.
For the load to be lowered, turn the crank anticlockwise.
TL150, TL1500
4. Maintenance
The winch must be unloaded for inspection and maintenance tasks.
Inspection and maintenance tasks must be performed by skilled personnel, e.g. via your Gebuwin
dealer.
Inspection/ Maintenance
interval
Before each use
Per quarter
Annually
* Texaco "Texclad premium 2" is recommended by us for the gearing (or equivalent). Orders can be placed
through your Gebuwin dealer or on the website: www.gebuwin.com
TL300, TL600
Tasks
-
visually check cable and loading hook
check the brake function
-
-
visually check cable and loading hook for any fracture
check the load pressure brake for wear and tear
-
When required replace the entire crankhead
Be aware: do not apply lubrication on or near the brake discs
check the cable according to DIN 15020 pg. 2 for wear and tear; also
-
test and maintain the minimum breaking force.
check the tightness of the mounting bolts
-
-
check all the winch parts for wear and tear; replace where necessary;
grease where needed.
-
check the type identity sticker for clarity
TL1000
11
Publicité
