Publicité
Les langues disponibles
Les langues disponibles
Chart 1
Type TL150 >> 1500 kg
Hoisting load first layer
Hoisting load last layer
Cable diameter
Min. breaking force of cable
Max. Cable storage calculated per
cable compartment
Max. cable layers per cable
compartment
Crank force first layer
Transmission ratio
Hoisting height per crank rev.
Own weight
Dimensions
Wall fastening, class 8.8 bolts
Permitted environment temperature
3.1. Function description
The winches are drum winches with a spur gear transmission. The load is held at each required height by a built
in load pressure brake. The housing is made of plate steel and is suitable for mounting on walls, masts and the
like. The crank is adjustable in length.
3.2. Mounting instructions
The winch must be mounted with the bolts as set out in chart 1.
To avoid tension build up in the winch housing, pay attention to the following:
there must be a smooth surface at the mounting bolt position
the wall or other construction must have sufficient carrying power
the level of the mounted winch must be checked with a spirit level in order to ensure good cable
movement.
All the nuts of the mounting bolts must be evenly fastened and secured.
3.3. Cable mounting
For the choice of cable, chart 1 must be consulted.
The cable must run-off upwards from the right side of the drum.
Be careful!
The brake does not work in the case of an incorrect cable run-off.
Kg
150
Kg
68
mm
4
kN
5,7
m
13
8
daN
11
1:1
mm
122
Kg
4
mm
3x M8
300
600
1000
166
308
587
5
6
15,9
22,9
21
12
7
6
6
10
1:7,4
1:7,4
1:17
32
28
10
11
Page 26, 27, 28
4x M8
4x M8
4x M12
-10 / +50 C
1500
844
9
10
51
63
25
21
5
5
11
12
1:25,7
20
14
27
27,5
4x M12
10
Publicité
