osann OLÉ Manuel D'utilisation page 13

CARRYCOT
A: Canopy
B: Socket Join
C: Boot Cover
D: Armrest
1. Open:
Take out the bassinet as photo showed.
2.-3. Attaching the iron lining:
Click the iron lining into the support plastic, check and
ensure that the iron lining and the support plastic closed
in the right position.
4. Attaching the sleeping pads:
Put the sleeping pads into the bassinet.
5. Front armrest installation:
Put the armrest into the both side of the frame plastic
housing, ensure the armrest fixed in the right position.
6. Canopy installation and use:
Canopy installation: Buckle up the canapy buckle to the
upper seat frame.
Canopy using: Pull forward the canopy to stretch the
canopy, and back to fold.
- 13 -
7. Attaching the sun visor
To mount the extra sun visor, attach it to the front zipper
of the hood.
8. Attaching the mosquito net
To attach the mosquito net to the canopy and the baby
carrier, close the zipper on the net with the rear zipper
on the canopy, fix the mosquito net with the tabs on the
sides of the baby carrier and tighten.
9. Installation carrycot:
Press the bottons on the seat unit to move the seat
out,then locate the carrycot on to the chassis as shown.
Warning: Make sure to locate the carrycot on the right
way.
EN