Publicité
Les langues disponibles
Les langues disponibles
FAMILIARISEZ-VOUS AVEC VOTRE
ASPIRATEUR PORTATIF
11
5
1. Bouton de relâche de la coupelle
2. Bouton d'alimentation On/Off
3. Poignée
4. Dispositif de surveillance du
MC
filtre Intelli-Sense
5. Coupelle à poussière (réservoir)
6. Trappe de succion
Spécifications techniques
Tension :
120 V, 60 Hz
Intensité :
7,5 Amps, 900 watts
Les illustrations peuvent différer du produit lui-même.
12
Filtre à débris
Filtre HEPA
11
7.
Bandoulière
8.
Brosse à poils d'animaux
9.
Brosse de nettoyage
10. Boyau souple
11. Jeu de filtre HEPA
12. Électrobrosse pneumatique
13. Suceur plat
18
PROBLEM
HAND VACUUM
WILL NOT
OPERATE
HAND VACUUM
WILL NOT PICK-
UP OR SUCTION
POWER IS
WEAK
TURBO BRUSH
DOES NOT
13
ROTATE OR
ROTATES
SLOWLY
DUST
ESCAPING
FROM HAND
VACUUM
HAND VACUUM
HOSE OR
BRUSHES WILL
NOT PICK-UP
ORDERING REPLACEMENT DUST CUP FILTERS
TO ORDER REPLACEMENT FILTERS OR FOR TECHNICAL
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
Please Note: After each Use - Always remove the Debris Screen from the HEPA
Dust Cup Filter, then vigorously "TapClean" HEPA Filter until no more dust can be
removed. The HEPA Filter should be rinsed and completely dried at least once a
month or depending on usage.
To wash your HEPA Dust Cup Filter, hold filter cartridge by frame flange and rinse
under a tap until all observable dirt has been removed. Some discoloration of the
HEPA filter material may occur, this is normal and will not affect the filter's
performance. When finished, shake off excess water. Do NOT wash in dishwasher.
It is important that when you wash the HEPA dust cup filter, you allow it to dry
COMPLETELY before using again. We recommend 24 hours to air dry. DO NOT
DRY IN DRYER.
TROUBLE SHOOTING GUIDE
POSSIBLE REASON
POSSIBLE SOLUTION
1.
Plug unit in firmly.
1.
Power cord not firmly plugged
2.
Check fuse or breaker. Replace
into outlet.
fuse/reset breaker.
2.
No power in wall outlet.
3.
Call 1 (800) 798-7398.
3.
Needs servicing.
4.
Turn the unit off and unplug from
4.
Thermostat has tripped.
outlet. Allow to cool.
1.
Empty dust cup.
1.
Dust cup is full.
2.
Turn unit off and unplug from wall
2.
Unit clogged.
outlet. Remove HEPA Dust Cup
3.
HEPA Dust Cup Filter needs
Filter and check for object(s) in air
cleaning or replacing.
duct and remove.
4.
Debris screen needs
3.
Clean or replace HEPA Dust Cup
cleaning.
Filter.
4.
Clean debris screen.
1.
Rotating brush or elbow
obstructed.
1.
Clear obstructions.
2.
Hose obstructed.
2.
Clear obstruction.
3.
HEPA dust cup filter clogged.
3.
Clean HEPA dust cup filter.
4.
Debris screen needs
4.
Clean debris screen.
cleaning.
1.
Dust cup is full.
1.
Empty dust cup.
2.
HEPA Dust Cup Filter is not
2.
Review HEPA Dust Cup Filter
installed correctly.
instructions.
3.
There is a puncture/hole in
3.
Replace HEPA dust cup filter.
HEPA Dust Cup Filter.
1.
Remove hose and/or bushes.
1.
Hose clogged.
Remove obstruction from hose.
2.
Dust cup is full.
2.
Empty and clean dust cup.
SUPPORT
for Model EP035TB
Call: 1 (800) 798-7398
Or visit our website: www.sharkvac.com
7
Publicité
