5. Operation
Starting The Engine
Primer
In cold condition, it's necessary to push the primer button on the air filter before pulling the
starter handle.
Primer only for cool engine use
Temperature
<0℃
0℃~10℃
10℃~20℃
>20℃
We also should put more fuel to mix air for easy start. When you push the primer button, it
will pump the fuel direct from carburetor to burning house.
Pull back on the brake lever and hold it against the handle.
With the starter handle in its support, take the starter handle with your right hand and
pull slowly as far as to have a resistance, then pull energetically on the starter handle
with starter rope through the support. (If the cold start is not sufficient enough, repeat
this operation 2 or 3 times)
Operation The Controls For Mowing
Blade is in action as soon as engine started. While the machine is working maintain the
security handle in working position. The engine will stop as soon as you release the
engine control bar.
Release the lever to stop the engine whenever you need to leave the mower.
Push time
3~4
2~3
1~2
1
75