EXIT Toys Supreme Round Mode D'emploi page 18

STEP 5
STEP 5
Lay the frame Pad (10) on the frame. Ad-
Lay the Pad (9) on the f rame.
just the position of the Frame Pad so that
Adjust the position of the Frame Pad
the slits are directly above the Socket, as
so that the slits are directly ab
shown.
Socket, as shown.
Look from the underside of the pad. Thread
the cord (18) through the V-rings in the
mat and the holes in the straps on the edge
Look underside of PAD.
of the net as shown in inset drawing A-B.
Thread the cord (14) through V-rings
on mat and holes in strap on edge of
Attach pad to the frame using the elastic
net as shown in inset drawing A-B.
straps with balls as shown in inset drawing
C. Tighten by moving the ball up as shown
in inset drawing D.
Attach pad to the frame using the
elastic straps with balls as shown in
inset drawing C. Tighten by moving
the ball up as shown in inset drawing D.
PAD back
A
STEP 6
Using the included plastic tie, attach
the warning label (23) to the frame
near the point where jumpers will
climb onto and off the trampoline.
18
ove the
B
strap
cord
5
10
Slit
D
C
PAD back
6
Frame
Supreme
Trampolines
Socket
slit of PAD
23
socket