Publicité
Les langues disponibles
Les langues disponibles
STEP 4
Caution: It is wise to wear
leather gloves while attaching
the Springs. Be careful where you
the Springs. Be careful where you
place your hands as the springs
and frame joints can pinch.
Attach the springs (9) as follows:
Hook one end of a spring (9) into
1.
Hook one end of a Spring (8) into
a V-ring sewn on the Jump mat.
Hook the spring tool into the free
2.
Hook a Spring tool into the free
end of the Spring(9). Pull it using
the spring tool until it reaches
the frame.
3.
Push the end of the spring into a
hole in the frame.
4.
Unhook the spring tool. the first
spring will be attached.
Note:The spring has a large hook
which attaches to the frame and a
which attaches to the frame and a
small hook which attaches to the
mat ring.
1.
First place 8 white V-rings on the
mat separately on both sides of
the T-joint and socket, attach 2
springs at #1 to both mat and
frame.
2.
Then attach 2 springs at #2, #3,
#4 in the same way until 8 white
springs have been attached.
c. Continue to attach 2 springs at #5,
3.
Continue to attach 2 springs at
#5, #6, #7, #8, #9, #10, #11,
#12 on both sides of T-joints and
match the correct mat ring
sockets. Be sure to match the
correct mat ring to the correct
e been attached, continue
frame hole. After these springs
have been attached, continue to
attach all remaining springs to
the mat and frame in any order.
ou attach Springs, carefully count
Safety Notice:
As you attach springs, carefully count
ring or a hole is skipped, reattach the
the V-rings and frame holes. If a V-
ring or a hole is skipped, reattach the
spring in the proper position.
WARNING!! : Please be careful where your hands and other parts of the
body are placed as the connector points and spring attachments can cre-
ate hand or body traps.
4
s
#11
Socket
#12
T-joint
#4
2 white
V-rings
Socket
#5
T-joint
#6
Socket
Supreme
Trampolines
V-ring
8
Anneau en V
9
Frame
Rahmen
Frame
Châssis
T-joint
#3
#10
2 white V-rings
2 white
V-rings
2 white V-rings
#7
#1
Socket
T-joint
Socket
#9
T-joint
#2
Socket
#8
T-joint
17
Publicité
