General Safety Indications; Noise Level; Technical Specifications; Section 2 - breviglieri turbo t 120sr Manuel D'utilisation Et D'entretien

turbo t 120 sr
▪
C) Serial number
▪
D) Weight (in kg)
▪
E) Year of manufacture
The data on the identification plate of the machine should be copied into the last page of this manual and must always be stated
when spare parts and/or assistance are required.
Standard machine supply includes:
▪
Driveline
▪
Operation and maintenance manual for the machine
▪
«CE» declaration of conformity

1.5 NOISE LEVEL

The noise level (overhead noise) has been measured in compliance with the current laws, with the following results:
▪
Acoustic pressure LpAm (A) .................................................................................................................................... dB 88
▪
Acoustic power LwA (A) .......................................................................................................................................... dB 105
The operator is advised to wear adequate ear muffs as personal protective equipment to prevent damage to his hearing during

1.6 TECHNICAL SPECIFICATIONS

Model Working
width
inch
120
58.27
t sr - 155
120
71.65
t sr - 180
120
78.74
t sr - 200
120
86.22
t sr
- 220
120
98.03
t sr - 250
120
109.1
t sr - 280
120
114.17
t sr - 300

SECTION 2

General safety indications

2.1 SAFETY NOTES

The user must inform his personnel about the risks deriving from accidents, about the safety devices installed to safeguard the
operator and about the general accident-preventing regulations established by the Directives and by the laws in force in the country
where the machine is used. It is therefore essential for operators to carefully read this manual, particularly the safety notes, and
to pay great attention to operations which could be particularly hazardous.
The Manufacturer declines all and every liability for failure to comply with the safety and prevention regulations given in this
manual. Pay attention to this symbol when it appears in the manual. It indicates a possible danger situation.
There are three danger levels:
▪
DANGER: This is the maximum level danger signal and warns that unless the described operations are carried out
CAUTION
daily work with the machine.
Weight Power required
lb HP
1667 65 - 75
1764 65 - 80
1874 75 - 90
1985 80 - 95
2139 95 - 110
2381 100 - 120
2564 105 - 120
- 24 -
N° cutting tools
kW Hammers
48 - 55 14
48 - 59 16
55 - 66 18
59 - 70 20
70 - 81 22
74 - 88 24
77 - 88 26
Belts RPM
Knives n°
42
48
4
54
60
540 - 1000
66
72
5
78