Cleaning Tools; Storing The Cleaner - Hoover VELOCITY EVO Manuel D'utilisation

WIPER BLADE ASSEMBLY
The front wiper blade supplied in the instruction
1
manual package is not necessary for normal cleaning.
Fitting the wiper blade will improve the energy
efficiency of the product, but this can also make the
product more difficult to push and manoeuvre.
If you decide to fit wiper blade, then grip the side of
2
the wiper blade and slide along the slot until the wiper
blade is fully located. To disassemble, lift the end of
the wiper blade and pull it out.
IMPORTANT: Switch the cleaner off and remove the
plug from the electricity supply before attempting any
maintenance.

CLEANING TOOLS

All accessories can be fitted directly onto the hose, handle and handle tube. Combine
accessories depending on use.
Mini Turbo Nozzle*: Ideal for removing pet hairs.
DO NOT touch the rotating brush.
Parquet Nozzle*: Ideal for cleaning delicate surfaces.
Connecting Accessory to Hose
Take off the upper hose end
1 1
pulling it upwards.
* Certain models only
Detach the lower hose end
2 2
pushing the lever and pull it
downwards.
Plug in the long stretch hose in
3 3
the hose socket.
Connecting accessory to Handle Tube
Repeat the above action 1,2,3 ,
1 1
then remove handle tube and open
the handle end cap.
IMPORTANT! When using cleaning tools, the cleaner must
be kept in the upright position, particularly when cleaning
stairs. Hold unit while using hose or handle tube.
CLEANING THE STAIRS
It is dangerous to place the cleaner
above you when cleaning stairs.
Ensure it is always operated in an
upright position.

STORING THE CLEANER

Turn the cleaner off and remove the plug from the socket.
Wind the power cord around the cord storage hooks.
- 4 -
Choose your accessory.
4 4
Connecting accessory to hose.
Connect hose to handle tube.
2 2
Connect accessory to the handle tube.
GB