Hoover VELOCITY EVO Manuel D'utilisation page 4

PREPARING YOUR CLEANER
Insert the main handle in the
cleaner body and then adjust
handle up/down to the desired
height.
SUPPLY CORD
Do not run over the supply cord.
Clip the supply cord in the cord
clip at the back of the handle
to avoid accidentally running
the cleaner over the cord and
causing any damage.
MINI TURBO BRUSH ASSEMBLY*
Assemble the mini turbo brush
holder to the handle tube of
the cleaner,then put the mini
turbo nozzle to the holder.
Put 2-in-1 tool and crevice tool
on board storage area.
* Certain models only
SWITCH
1.Main power On/Off switch
Press the ON/OFF switch to
operate the cleaner.
2.Brush Bar Switch
Press the brush bar on/off
button at the top of the unit.
Brush Bar ON - recommended
for carpets.
Brush Bar OFF - suitable for
hard floors.
CLEANER RELEASE
Recline to unlock the cleaner.
- 3 -
Twist the handle to manoeuvre under or around the
funiture.
SUCTION CONTROL
Your product is fitted with suction control which
allows you to select the desired suction level by
sliding the regulator up or down. It can also be used
to reduce the operating push force if required.
GB