LG STEAM DRYER DLEX0001TM Guide De L'utilisateur page 39

BEFORE CALLING FOR SERVICE
Problem
Steam doesn't
generate but no error
code is shown.
Garments still
wrinkled after
Steam FreSh .
™
there are no creases
left on garment after
Steam FreSh .
™
Garments have
static after reDUCe
StatIC.
Garments are too
damp or too dry after
reDUCe StatIC.
Garments are not
uniformly damp after
eaSY IrON.
Water drips from door
during Steam Cycle.
Steam is not visible
during Steam Cycle.
Drum does not turn
during Steam Cycle.
Cannot see steam
vapor at the
beginning of cycle.
the display shows
BULKY LOaD.
Odors remain in
clothing after
Steam FreSh .
™
2 bars are displayed
In the LCD screen.
END OF CYCLE
4 bars are displayed
In the LCD screen.
NEED FLOW CHECK
THE DUCTWORK HAS
A BLOCKAGE THAT NEEDS
TO BE REMOVED
IMMEDIATELY.
(cont.)
Possible Causes
• Water level error.
• Too many or too different
types of garments in dryer.
• The function of this cycle
is to remove wrinkles from
fabric.
• This is normal.
• Correct drying options not
selected.
• This is normal.
• This is normal.
• This is normal.
• This is normal.
• This is normal.
• MORE TIME button pressed.
• STEAM FRESH ™ did not
remove odor completely.
• Ductwork is slightly too
long or has too many
turns/restrictions.
• Partial blockage of the
ductwork due to lint buildup.
• Ductwork is too long or has
too many turns/restrictions.
• Significant blockage of the
ductwork due to lint buildup
or debris.
T RO U B L E S H O OT I N G
Solutions
• Unplug dryer and call for service.
• Small loads of 1 to 5 items work best.
• Load fewer garments. Load similar-type garments.
• Use an iron to make creases.
• Depends on individual moisture level in skin.
• Select load weight manually before starting
REDUCE STATIC option.
• Depends on the amount or type of garments.
• This is steam condensation on door surface.
• Steam vapor is difficult to see when the door is
closed.
• The drum is turned off so that the steam vapor
remains in the drum.
• Steam is released at different stages of the cycle
for each option.
• Pressing the MORE TIME button several times will
set the cycle for a large load such as a comforter.
• Fabrics containing strong odors should be
washed in a normal cycle.
• sInstall a shorter or straighter duct run. See the
Installation Instructions.
• Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times
may be longer.
• If "END OF CYCLE" is displayed after the end of
cycle, it will be off in 4 minutes. If POWER button
is pressed or the door is opened, power will be off
immediately.
• Install a shorter or straighter duct run. See the
Installation Instructions.
• D uctwork should be checked/cleaned soon.
D ryer can be used in this condition, but drying times
may be longer.
• I f "NEED FLOW CHECK" is displayed after the end
of cycle, it will be off in 2 hours. If POWER button
is pressed or the door is opened, power will be off
immediately.
39