Technical Data - Soehnle SYSTO MONITOR 200 Mode D'emploi

TECHNICAL DATA

Item number
Power supply
EN
Display mode
Measurement mode Oscillographic testing mode
Measurement range Target cuff pressure: 0 mmHg – 300 mmHg (0 kPa – 40 kPa)
Accuracy
Normal operating
conditions
Storage and trans-
port conditions
Measurement
perimeter on the
upper arm
Weight
External dimensions approx. 110 ×110 × 41 mm / 4.33 × 4.33 × 1.61 inch
Accessories
Operating mode
Protection category Applied part type BF
Water ingress
protection
Software version
28
68108
SN
Battery operation: 4 alkaline batteries AAA 6V DC
Power adapter operation 6 V 1 A
(Please use only the recommended power adapter.)
LCD display (40 x 60 mm / 1.57 × 2.36 inch)
measurement pressure
SYS: 60 mmHg – 230 mmHg (8.0 kPa – 30.7 kPa)
DIA: 40 mmHg – 130 mmHg (5.3 kPa – 17.3 kPa)
Pulse: (40 – 199) beats per minute
Pressure: 5 °C – 40 °C within ± 3 mmHg (0.4 kPa) pulse at: ± 5 %
Temperature: 5 °C to 40 °C
Relative humidity: ≤85 % RH
Atmospheric pressure: 86 kPa to 106 kPa
Temperature:-20 °C to 60 °C
Relative Humidity: 10 % RH-93 % RH
Atmospheric Pressure: 50 kPa-106 kPa
22 – 42 cm / 8.66 – 16.53 inch
approx. 175 g / 6.17 oz (excluding batteries and cuff)
4 alkaline batteries AAA
Continuous operation
IP21 means that the blood pressure monitor is protected against solid
foreign bodies with a size of 12.5 mm / 0.49 inch and larger as well
as vertically dripping water.
A01
WARNING: Modifications of the device are not permitted.
(Modell: TMB-1491-D)