Technical Data - Soehnle Systo Monitor 180 Mode D'emploi

TECHNICAL DATA

Item number
Power supply
GB
Display mode
Measurement mode Oscillographic testing mode
Measurement range Target cuff pressure: 0 mmHg – 299 mmHg (0 kPa – 39.9 kPa)
Accuracy
Normal operating
conditions
Storage and trans-
port conditions
Measurement
perimeter on the
upper arm
Weight
External dimensions approx. 110 ×110 × 41 mm / 4.33 × 4.33 × 1.61 inch
Accessories
Operating mode
Protection category Applied part type BF
Water ingress
protection
Software version
28 28
68127
Battery operation: 4 alkaline batteries AAA 6V DC
LCD display (41 x 60 mm / 1.61 × 2.36 inch)
measurement pressure
SYS: 60 mmHg – 230 mmHg (8.0 kPa – 30.7 kPa)
DIA: 40 mmHg – 130 mmHg (5.3 kPa – 17.3 kPa)
Pulse: (40 – 199) beats per minute
Pressure: 5 °C – 40 °C within ± 3 mmHg (0.4 kPa) pulse at: ± 5 %
Temperature range :+5°C to +40°C
Relative humidity range of 15% to 90%, non-condensing
Atmospheric pressure range of: 700 hPa to 1060 hPa
Temperature:-20°C to +60°C
A relative humidity range of ≤ 93%, non-condensing, at a water
vapour pressure up to 50hPa
22 – 42 cm / 8.66 – 16.53 inch
approx. 175 g / 5.93 oz (excluding batteries and cuff)
4 alkaline batteries AAA
Continuous operation
IP21 means that the blood pressure monitor is protected against solid
foreign bodies with a size of 12.5 mm / 0.49 inch and larger as well
as vertically dripping water.
A01
WARNING: Modifications of the device are not permitted.
(Modell: TMB-1889)