Terrier FSV Mode D'emploi page 6

11c INSPECTIETABEL
Maanden 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60
Jaren 1
Veiligheidsinspectie door uw eigen
inspecteur
Onderhoud door een erkend
Terrier reparateur
Revisie door een erkend
Terrier reparateur
10
2 3 4 5
CONTENTS
1 General
2 Operating principle
3 Permitted applications
4 Safety instructions
5 Lifting
6 Maintenance
7 Disassembling/Assembling
8 Overhauling
9 Disposal
10 Troubleshooting checklist
11 Warranty
Appendix - Exploded view of the safety beam lifting clamp
- Load diagrams (working load limits)
1 GENERAL
Congratulations with the purchase of your new Terrier FSV (W) or TBS lifting clamp.
The quality systems of management and services of Terrier Lifting Clamps B.V. fully comply
with ISO 9001 standards. The many years of vast experience are a guarantee of optimum
quality and safety. Terrier Lifting Clamps are made of top quality alloyed steel and fully
comply with European standards as laid down in Machine Directive 2006/42/EG.
2 OPERATING PRINCIPLE
The FSV(W) and TBS lifting clamps feature a screw thread mechanism consisting of a threa-
ded spindle and two spindle nuts. As soon as the spindle has been actuated, this mecha-
nism ensures that a constant clamping force is applied by the jaws. In this way the clamp will
not work itself loose from the object.
The linked clamping parts ensure that the clamping force continues, which means that the
load continues to be held firmly. As there is no cam and pivot arrangement the object to be
lifted does not become damaged.
3 PERMITTED APPLICATIONS
FSV
The FSV(W) lifting clamps are only suitable for lifting and handling steel beams (T, UNP,
INP, IPE, HE etc) and steel strips.
Permissible positions for using the two clamps are:
- lifting and handling from a vertical position.
- lifting work, where the lifting clamp is used as a lifting point.
TBS
The TBS bulb screw clamps have been specifically and exclusively designed for the provision
on a bulb profile of a temporary lifting point. (HP profile according to EN 10-204)
The TBS bulb screw clamp is used individually to create a temporary lifting point on a bulb
profile.
The lifting shackle may be subjected to a lateral load of up to 45° left or 45° right in rela-
tion to the perpendicular.
11
11
11
12
13
13
14
15
15
15
15
32
33
11