Adjusting The Force Of The Door; Adjusting The Top Plate - TermaTech TT60 Mode D'emploi

13.5. Adjusting the force of the door

13.7 Mounting of fresh air plugs on the TT60W
Lift the direct air kit gently into place and push
it lightly against the Stove.
Changing the force of the door.
"stronger force" unmount the
Changing the force of the door.
screws in the 2 magnets. Place
"Stronger force" unmount the screws
washers under each magnet,
in the 2 magnets. Place washers
to match the desired force. Re-
under each magnet, to match the
mount the screws. (Be careful
desired force. Re-mount the screws.
as the magnets are fragile
(Be careful as the magnets are fragile
Possibly use pliers to steady
Possibly use pliers to steady the
the magnet.
magnet.
"Less force" Remove the screws
in the magnets. Remove.the
"Less force" Remove the screws in the
washers under each magnet to
magnets. Remove the washers under
match the desired force. Re-
each magnet to match the desired
mount the screws.
force. Re-mount the screws.
We recommend a force of 4,5
til 5kg.
We recommend a force of 4,5 to 5kg.
Adjusting the top plate is done via the
4 nuts located under the top plate.

13.6. Adjusting the top plate

13.6. Adjusting the top plate
Fix the direct air kit with the 4 screws supplied
with the stud.
Adjusting the top plate is done via the
Adjusting the top
4 nuts located under the top plate.
plate is done via the
4 nuts located under
the top plate.
41