Table Des Matières; Important Safety Instructions; Warnings For Use - Sharp AY-XP18GR Mode D'emploi

ENGLISH
Thank you for purchasing a SHARP air conditioner. Please read this manual carefully
before operating the product.
CONTENTS
• IMPORTANT SAFETY INSTRUCTIONS .... E-1
• PART NAMES ........................................... E-3
• SETTING AIR PURIFYING FILTER .......... E-5
• USING THE REMOTE CONTROL ............E-6
• BASIC OPERATION .................................E-8
• ADJUSTING THE AIR FLOW DIRECTION ..... E-10
• PROGRESSIVE AIRFLOW ....................... E-11
• FULL POWER OPERATION..................... E-11

IMPORTANT SAFETY INSTRUCTIONS

WARNINGS FOR USE

1 Do not pull or deform the power supply cord. Pulling and misuse of the power supply cord
can result in damage to the unit and cause electrical shock.
2 Be careful not to expose your body directly to the outlet air for a long time. It may affect
your physical conditions.
3 When using the air conditioner for infants, children, elderly, bedridden, or disabled people
make sure the room temperature is suitable for those in the room.
4 Never insert objects into the unit. Inserting objects can result in injury due to the high
speed rotation of internal fans.
5 Ground the air conditioner without fail. Do not connect the grounding wire to gas pipe,
water pipe, lightning rod or telephone grounding wire. Incomplete grounding may cause
electric shock.
6 If anything is abnormal with the air conditioner (ex. a burning smell), stop the operation
immediately and turn the circuit breaker OFF.
7
The appliance shall be installed in accordance with national wiring regulations. Improper
cable connection can cause the power supply cord, plug and the electrical outlet to
overheat and cause fire.
8 If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard. Use only the manufacture-
specified power cord for replacement.
WARNINGS FOR INSTALLATION/REMOVAL/REPAIR
• Do not attempt to install/remove/repair the unit by yourself. Incorrect work will cause electric
shock, water leak, fire etc. Consult your dealer or other qualified service personnel for the
installation/removal/repair of the unit.
• PLASMACLUSTER OPERATION............. E-12
• SELF CLEAN OPERATION ...................... E-13
• ONE-HOUR OFF TIMER .......................... E-13
• TIMER OPERATION ................................. E-14
• AUXILIARY MODE .................................... E-16
• MAINTENANCE ........................................ E-16
• ADDITIONAL NOTES ON OPERATION ......... E-18
• TIPS ON SAVING ENERGY ..................... E-18
• BEFORE CALLING FOR SERVICE.......... E-19
E-1