Cleaning The Unit And The Remote Control - Sharp AY-XP18GR Mode D'emploi

Masquer les pouces Voir aussi pour AY-XP18GR:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
MAINTENANCE

CLEANING THE UNIT AND THE REMOTE CONTROL

• Wipe them with a soft cloth.
• Do not directly splash or pour water on them. We can cause electrical shock or
equipment damage.
• Do not use hot water, thinner, abrasive powders or strong solvents.
MAINTENANCE AFTER AIR
CONDITIONER SEASON
1
Operate the unit in the SELF
CLEAN OPERATION to allow the
mechanism to thoroughly dry.
2
Stop the operation and unplug the
unit. Turn off the circuit breaker, if
you have one exclusively for the
air conditioner.
3
Clean the filters, then reinstall
them.
CHANGING THE AIR PURIFYING FILTERS
The filters should be changed every 3 ~ 6 months
Air filter
Air purifying filter
NOTE
:
• The dirty air purifying filters are not washable for reuse.
The new filters are available at your nearest dealer.
Replacement filter: Type AZ-F1800C
Disposal of Filters
Please dispose of replaced filters according to the local disposal laws and regulations.
Air Purifying Filter materials:
• Filter: Polypropylene
• Frame: Polyester
1
REMOVE THE AIR FILTERS
Filter stopper
2
CHANGE
FILTERS
1 Take off the old filters from the air filters.
2 Set the new air purifying filters, under the
3
REINSTALL THE AIR FILTERS
E-17
MAINTENANCE BEFORE
AIR CONDITIONER SEASON
1
Make sure that the air filters are
not dirty.
2
Make sure that nothing obstructs
the air inlet or outlet.
3
Check the outdoor mounting rack
periodically for wear and to make
sure it is firmly in place.
THE
AIR
filter stoppers located on the air filters.
PURIFYING

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ay-xp24grAe-x18grAe-x24gr

Table des Matières