Buffalo GJ452 Mode D'emploi page 5

Telephone Helpline: 0845 146 2887 (United Kingdom)
Troubleshooting
If your BUFFALO appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The unit is not working
Appliance does not reach set
temperature
Appliance heats up but
indicator light does not come on
Power indicator light comes on
but appliance does not heat up
Appliance slow to heat up
Technical Specifications
Model Voltage Power
GJ452 230v 50Hz 2950W
Electrical Wiring
This appliance is supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse as standard. The plug is to be
connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit. If in doubt
consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection
being required they must be readily accessible.
Probable Cause
The unit is not switched
on
Plug and lead are
damaged
Fuse in the plug has
blown
Power supply
Internal wiring fault
Faulty thermostat
Faulty element
Bulb has expired
Faulty element
Faulty thermostat
Thermostat set
incorrectly
Cooking surface not
clean
Faulty element
Plate Type
Current
Top Bottom
12.8A Rib Flat
5
Action
Check the unit is plugged in correctly and
switched on
Call BUFFALO agent or qualified technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Check thermostat
Clean cooking surface
Call BUFFALO agent or qualified technician
Dimensions
h x w x d (mm)
230 x 565 x 540
UK
Weight
(kg)
38.5