Buffalo GJ452 Mode D'emploi page 3

Telephone Helpline: 0845 146 2887 (United Kingdom)
Operation
Seasoning the Cooking Surfaces
The cooking plate surfaces need to be 'seasoned' before using for the first time.
1. Ensure the cooking surfaces are clean.
Brush the surfaces with cooking oil.
2.
Set the thermostat(s) to 110°C and turn the appliance On. The power indicator light turns on.
3.
4. Once the appliance reaches temperature the power indicator light turns off.
Turn the appliance Off and allow the to cool before wiping away any excess oil.
5.
6. The appliance is now ready to use.
Cooking
1. Close the plates.
Note: It may be necessary to slightly grease the plates with cooking oil before cooking depending on the
foodstuff.
2. Set the thermostat(s) to the desired temperature (60°C-300°C) and turn the appliance On. The power indicator light(s)
turn on.
Note: 200°C to 220°C is suitable for general cooking.
The power indicator light(s) turn Off when the appliance has reached the set temperature.
3.
Lift the top plate and place the foodstuff on the bottom plate.
4.
Lower the top plate.
5.
Note: All BUFFALO Contact Grills feature counter-balanced top plates that allow for even cooking.
Adjusting Top Plate Tension
Use the Allen key supplied to adjust the tension of the top plate. Turn clockwise to
tighten, anti-clockwise to loosen.
Note: It is possible to tighten the plate so that it sits in the open position (if required).
BUFFALO recommend the appliance is disconnected from the power supply and allowed to cool before any adjustments are
made.
3
UK