PROBLEM
No coffee comes out.
Warning light
D blinks RED.
The coffee is not hot
enough.
The lever cannot be
lowered.
Warning light D is lit
steadily in RED.
When a button is
pressed to dispense
coffee, the machine
seems to work but
then stops without
dispensing any coffee,
or only dispenses a tiny
amount.
Coffee is dispensed
very slowly, and is of
poor quality.
About 4 kg
1.2 litres
ambient temperature:
10°C - 40°C
377 mm
148 mm
English
Troubleshooting
POSSIBLE CAUSE
The water tank is empty.
- Cold cups / espresso
cups.
- Scale build-up in
machine.
- The used capsule drawer
is full.
- Capsule stuck inside the
machine.
Heating problems.
Incorrect quantity
programming.
Button C was used with an
espresso capsule.
Technical data
See the data plate
on the base
of the machine.
Max. 15 bar
< 70 dB A
8 capsules
284 mm
SOLUTION
Fill the tank with fresh water. Press
a button to refi ll the circuit. When
the buttons remain steadily lit, the
appliance is ready for use.
- Preheat cup.
- Descale.
- Empty out the used capsule
drawer.
- Remove the used capsule.
Turn off the machine, then turn it
back on. If the problem persists,
take the machine to an Authorised
Service Centre.
Reprogram the quantity associated
with that button.
See ch. "Programming the quantity
of coffee in a cup".
Use buttons A or B.
The materials and
objects which come
into contact
with food products
comply with the
requirements of
European Regulation
1935/2004.
364 mm
23