Maintenance; Malfunctions / Troubleshooting; Decommissioning / Disposal - Dimplex SI 75ZSR Instructions D'installation Et D'utilisation

9.4 Maintenance

Devices with a minimum of 3 kg refrigerant, or hermetically
sealed devices with a minimum of 6 kg refrigerant must be leak-
proof tested yearly by the operator according to ES842/2006.
The leak-proof testing is to be documented and archived for a
minimum of 5 years. The test is to be carried out by certified per-
sonnel only according to ES1516/2007. The attached table can
be used as a basis for the documentation.
www.dimplex.de
10 Malfunctions /
Troubleshooting
This heat pump is a quality product and designed for trouble- and
maintenance-free operation. In the event that a malfunction oc-
curs nevertheless, it will be indicated on the display of the heat
pump controller. Simply consult the Malfunctions and Trouble-
shooting table contained in the in-stallation and operating man-
ual of the heat pump controller (manager).
If you cannot correct the malfunction yourself, please contact the
after-sales service agent in charge.
ATTENTION!
All work on the heat pump may only be performed by an authorised an
qualified after-sales service.
ATTENTION!
Disconnect all electrical circuits from the power supply before opening
the enclosure.
11 Decommissioning /
Disposal
Before removing the heat pump, disconnect the unit from the
power source and close all valves.
Environment-relevant requirements regarding the recovery, re-
cycling and disposal of service fuels and components in accord-
ance with all relevant standards must be adhered to. Particular
attention must hereby be paid to the proper disposal of refriger-
ants and refrigeration oils.
11
E-7