Table des Matières
Publicité
WARNING
Disconnect the electrical supply before servicing or cleaning the unit. Failure to do
so could result in electrical shock or personal injury from cleaner suddenly
starting.
Latches
Loquets
Lengüetas
Lower Plate
Plaque inférieure
Base inferior
Electrical Shock or Personal Injury Hazard
Removing and Installing Lower Plate
Before servicing any parts,
disconnect vacuum from electrical
outlet.
Place paper under nozzle anytime
lower plate is removed to protect
floor.
Place handle in upright position and
turn vacuum over to expose lower
plate.
Release lower plate by pressing two
(2) latches inward.
Remove lower plate and remove any
residue that may exist in belt area.
Reinstall lower plate by hooking front
end of lower plate into slots on front
of nozzle housing.
Make sure all wires are routed
properly and not pinched.
Press lower plate into place then
push two (2) latches outward.
- 28 -
Publicité
Table des Matières
