Safety Tips; Use In Accordance With Regulations - Becker Centronic EasyControl EC5410-II Notice De Montage Et D'utilisation

Masquer les pouces Voir aussi pour Centronic EasyControl EC5410-II:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Danger
Please keep the instructions in a safe place!
• Use in dry rooms only.
• Use unmodified Becker original parts only.
• Keep persons away from the system guide track.
• Keep children away from controls.
• Please comply with national stipulations.
• Dispose of used batteries correctly. Always replace the battery with
an identical battery type (CR 2430)
• If the system is controlled using one or several transmitters, the sys-
tem guide track must be visible during operation.

Use in accordance with regulations

The EC5410-II should only be used to control Centronic compatible radio drives
and radio controls.
• Please note that radio equipment cannot be operated in areas with increased
risk of interference (e. g. hospitals, airports).
• The remote control is only permitted for equipment and systems with which
a malfunction in the hand-held transmitter or receiver does not present a risk
to persons, animals or objects, or this risk is covered by other safety devices.
• The operator does not enjoy any protection from disturbances by other re-
mote signalling equipment and terminal equipment (for example, also by
radio sets operated in the same frequency range in accordance with regula-
tions).
• Use radio receivers in conjunction only with devices and systems permitted
by the manufacturer.
Note
Ensure that the controls are not installed and operated in the vicinity of
metal surfaces or magnetic fields.
Radio equipment transmitting at the same frequency could interfere
with reception.
It should be noted that the range of the radio signal is restricted by leg-
islation and constructional measures.

Safety tips

de
en
fr
nl
13

Publicité

Table des Matières
loading

Table des Matières