Publicité
Les langues disponibles
Les langues disponibles
Press the power button, the device is in standby mode.
Press the menu button and select the desired program within 15 seconds.
With these buttons the time can be set from 5 – 60 minutes within
steps of 1 minute.
Start / Pause
The program will be started or interrupted. The set time is stopped.
Press this button again to restart. If the device has been stopped for more
than 10 minutes, it shifts into the standby mode and has to be
reprogrammed.
Do not press the on / off switch several times in succession to avoid damages
on the compressor. There should be at least a 5-minute break in between.
Preparation
∙ Unpack the machine vertically.
∙ Clean all removable parts to remove any production residue.
∙ Leave the appliance to stand for 2 hours before first use to allow the refrigerant
(R600a) to settle.
∙ Insert the ice container and place the rabble arm on the axis in the ice container.
∙
17
Publicité
