Fcc; Gpl Code Statement - CAB EOS Manuel D'utilisation

9 Certifications
34

9.2 FCC

NOTE : This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. The equipment generates, uses, and can radiate radio
frequency and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user may be required to correct
the interference at his own expense.

9.3 GPL Code Statement

This cab product includes software code developed by third parties,
including software code subject to the GNU General Public License
("GPL") or GNU Lesser General Public License ("LGPL"). As applicable,
the terms of the GPL and LGPL, and information on obtaining access to
the GPL Code and LGPL Code used in this product, are available to you
at:
The GPL Code and LGPL Code used in this product is distributed
WITHOUT ANY WARRANTY and is subject to the copyrights of one or
more authors. For details ,see the GPL Code and the LGPL Code for this
product and the terms of the GPL and LGPL.
Written Offer to GPL Source Code:
Whereas such specific license terms entitle you to the source code of
such software, cab will provide upon written request via email and/or
traditional paper mail the applicable GPL source code files via CD-ROM
for a nominal cost to cover shipping and media charges as allowed
under the GPL and LGPL.
Please direct all inquiries to:
http://www.cab.de/opensource
cab Produkttechnik Sömmerda
Gesellschaft für Computer-
und Automationsbausteine mbH
99610 Sömmerda
34