Titan PKE-HD Notice D'instructions page 28

4. Use your right thumb to press the „tension
strap" key button (a) until it engages the
notch (g) (the compressed air motor Stops if
the notch released) For PKE-HD tools
having built-in-free-wheeling mechanisms
the "tension strap" key button (a) should be
pressed until the desired strap tension has
been achieved
5. lf the strap tension required has been
achieved then the „joint" key button (b) is
pressed until the lock has been formed and
the strap is audibly cut off behind the joint.
6. Take hold of strap end that is cut off with
your left hand, press the air lever (c) and the
compressed air motor (f) together using your
right hand und swing the tool to the right out
of the strapping.
PKE-HD
.
H228-HD EU 21/11
28 / 57