Intended Use - Titan PKE-HD Notice D'instructions

2.1. Intended use

Proper use of this pneumatic tool includes bundling, collecting and securing by
mean of strapping using stell straps. Packed goods such as section steel,
packages of stone, paper, timber, etc. are suitable application examples. The tool
is designed and manufactured for safe handling during the strapping operation.
This tool is intended for strapping with steel strap material.
Unintended use!
Strapping material must not be used for the hoisting of loads, this strapping
tool may only be used as intended and specified above.
The use of plastic straps is not allowed with this device.
The PKE-HD combines modern No-Seal-Joint technology with the advantages
power-saving pneumatics.
The PKE-HD is based on the tried and tested HKE manual strapping tool with the
specially patented locking mechanism developed by TITAN. It reduces the force
required and compared to conventional tools, prolongs the service life of those
parts which are subjected to mechanical stress.
It has a suspension facility that is capable of latching and which makes
weightless strapping possible at three different levels.
The standard TITAN strapping tool is supplied with a notch for stopping the
compressed air motor. For safety reasons the PKE-HD is also available with a
free-wheeling mechanism which maintains the strap tension instead of a notch.
The TITAN PKE-HD strapping tool satisfies German and European safety
requirements and complies with the provisions of the following EU
Guidelines: see Declaration of conformity of the machinery.
Standards applied and technical specifications:
see Declaration of conformity of the machinery.
PKE-HD
H228-HD EU 21/11
20 / 57