General - Titan PKE-HD Notice D'instructions

2.

General

Many thanks for your confidence in the technology of
These operating instructions are meant to facilitate the familiarization with the unit PKE-HD
and the intended use. The operating instructions contain important instructions on how the
unit can be operated safely, as intended and economically. Following the instructions helps
avoid risks, reduce repair works and downtimes and increases the reliability and life of the
unit.
These operating instructions must be available at the place where the unit is operated. They
must be read and applied by all persons working with the unit. Such works especially include
operation, troubleshooting and maintenance.
Apart from the operating instructions and the regulations for the prevention of accidents
being applicable in the country where the unit is operated and on site the recognized
technical rules for safety-related and competent works have to be observed.
Explanatory notes on the warning and instruction symbols:
Caution!
Used to indicate danger to life and limb.
Attention!
Used to indicate danger that can result in material damage.
Notice!
Used to indicate general information and information which if ignored can
cause disruptions in operation
The manufacturer reserves the right to make changes to the scope of delivery at any
Copyright © TITAN Umreifungstechnik GmbH & Co.KG 2015 all rights reserved.
The contents of this document must not be duplicated, handed to third parties, published or saved in any form,
neither fully nor partly, without prior written permission by TITAN Umreifungstechnik GmbH & Co.KG.
PKE-HD
TITAN Umreifungstechnik GmbH & Co. KG
time for the purpose of improving the product.
is a registered trademark of TITAN Umreifungstechnik GmbH & Co.KG.
H228-HD EU 21/11
.
19 / 57