Troubleshooting - Ryobi RY40500 Manuel D'utilisation

Chain specifications: .375 in. pitch, low profile narrow kerf, .043 in. chain gauge, 5-tooth drive
sprocket.
Length of Bar
12 in.
PROBLEM
Bar and chain running
hot and smoking.
Motor runs, but chain is
not rotating.
BAR AND CHAIN SPECIFICATIONS
Guide Bar Part Number
099966002001

TROUBLESHOOTING

CAUSE
1. Check chain tension for
over tight condition
2. Chain oil tank empty.
1. Chain tension too tight.
2. Check guide bar and chain
assembly.
3. Check guide bar and chain
for damage.
For any questions about operating or maintaining your product,
Your product has been fully tested prior to shipment to ensure
Chain Part Number
099966002002
1. Tension chain. Refer to Chain
2. Check oil tank.
1. Retension chain, Refer to Chain
2. Refer to Assembling the Bar and
3. Inspect guide bar and chain for
CALL US fIRST
call the Ryobi
®
your complete satisfaction.
28 - English
SOLUTION
Tension earlier in this manual.
Tension earlier in this manual.
Chain earlier in this manual.
damage.
Help Line!
Drive Links
52