Specific Safety Rules - Ryobi RY40500 Manuel D'utilisation

GUIDE BARS
Generally, guide bars with small radius tips have
somewhat lower kickback potentials.
When making a replacement, be sure to order one
of the Ryobi bars listed for the saw in this opera-
tor's manual.
 Battery operated units do not have to be plugged
into an electrical outlet; therefore, they are
always in operating condition. Be aware of pos-
sible hazards even when unit is not operating.
 Remove the battery pack from the chain saw
before cleaning, servicing, storing, removing
material from the unit, changing accessories
such as the bar and chain, or when not in use.
GENERAL SAFETY RULES

SPECIFIC SAFETY RULES

SAVE THESE INSTRUCTIONS
6 - English
The proper size SAFE-T-TIP
installed on the bar. Use only guide bars that have
a provision for mounting the SAFE-T-TIP
 Use only with charger listed. For use with 40V
lithium-ion battery packs, see tool/appliance/
battery pack/charger correlation supplement
988000-842.
 Save these instructions. Refer to them fre-
quently and use them to instruct others who
may use this tool. If you loan someone this tool,
loan them these instructions also.
nose guard comes
®
.
®