Bar And Chain Combinations; Troubleshooting - Ryobi RY40503 Manuel D'utilisation

Chain specifications: 3/8 in. pitch, low profile narrow kerf, .050 in. chain gauge, 6-tooth drive sprocket.
Length of Bar
14 in.
PROBLEM
Bar and chain running hot and
smoking.
Motor runs, but chain is not
rotating.
This product has a Five-year Limited Warranty for personal,
family, or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com

BAR AND CHAIN COMBINATIONS

Guide Bar Part Number
314675001

TROUBLESHOOTING

CAUSE
1. Check chain tension for
over tight condition.
2. Chain oil tank empty.
1. Chain tension too tight.
2. Check guide bar and chain
assembly.
3. Check guide bar and chain
for damage.
For any questions about operating or maintaining
your product, call the RYOBI Help Line!
Your product has been fully tested prior to shipment
to ensure your complete satisfaction.
or call (toll free) 1-800-860-4050.
Chain Part Number
CALL US FIRST
29 - English
682006004
SOLUTION
1. Tension chain. Refer to
Chain Tension earlier in this
manual.
2. Check oil tank.
1. Retension chain, Refer to
Chain Tension earlier in this
manual.
2. Refer to Assembling the
Bar and Chain earlier in this
manual.
3. Inspect guide bar and chain
for damage.
Drive Links
52