Bestron SUMMER BREEZE DFT35WB Mode D'emploi page 24

Les langues disponibles

OPERATION - General

The appliance is intended only for domestic use,

not for professional use.

1. Pivot button

2. Speed switch 0 - I - II - III

3. Adjusting nut

4. Securing screw

5. Adjusting screw

6. Securing nut

7. Upper side stand

8. Stand

9. Base

10. Ring

11. Wing nut

OPERATION - Before first use

Remove the fan from the packaging and remove all packaging materials.

OPERATION - Assembling

1. Remove the securing screw (4) and the securing nut (6) from the upper side of the stand (7).

2. Unscrew the wing nut (11) and the ring (10) from the bottom side of the stand.

3. Place the stand (8) in the recess on the top side of the base (9). Now turn the stand and the base

around.

4. First place the ring (10) and then fasten the wing nut (11). Now turn the base around and place it on a

smooth and stable underground.

5. Remove the adjusting nut (3) of the hinge of the motor casing.

6. Place the hinge of the engine casing on the stand and press the securing screw (4) through the stand.

Fasten the securing screw (5).

7. Attach the securing nut (6) to the securing screw. The motor casing is now attached to the stand.

8. Now fasten the adjusting nut (3) to the hinge of the motor casing. With the adjusting nut, you can set

the vertical position of the ventilation basket.