Beko WITV8712 XW0 Manuel D'utilisation page 27

Problem
Laundry remains wet at the end of
the programme. (*)
(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine
and to its surrounding environment. Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.4.2
A
CAUTION:
Authorised Service Agent. Never try to repair a nonfunctional product yourself.
Washing Machine / User's Manual
Reason
Excessive foam might have occurred and automatic
foam absorption system might have been activated
due to too much detergent usage.
If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the
Solution
• Use recommended amount of detergent.
27 / EN