Loading The Dishwasher - Bosch 800 Série Notice D'utilisation

Setting Amount
medium setting
§:‹„
medium/high setting
§:‹...
high setting
§:‹†
highest setting
§:‹‡
Press the On/Off button (.
1.
Hold down the function key #
2.
and press the Start button P
until the display 8 indicates
š:‹x (x can be any number).
Release both buttons.
Press the function key # until
3.
the display 8 shows §:‹†.
Press the function key 3 to
4.
select the desired setting.
Press the Start button P to
5.
save the setting.
Turning off rinse aid
indicator
Proceed as described in the section
"Setting the amount of rinse aid
used" and set value to §:‹‹. The
rinse aid indicator is now turned off.
NOTICE
Using no rinse aid or setting the
dispenser to §:‹‹ may result in
longer cycle times consuming more
energy and water. The higher
temperatures and longer cycle times
can damage fine china or glassware.
Loading the Dishwasher en-us
-
Loading the
Dishwasher
Dishware material
a s h e r L o a d i n g t h e D i s h w
Before using your dishwasher
Note:
for the first time, check the
information in this section. Some
items are not dishwasher-safe and
should be hand washed; others
require special loading.
Recommended
Aluminum Colored anodized aluminum
may fade over time.
Minerals in your water may
cause the aluminum to
darken or spot. This can
usually be removed with a
soap-filled steel wool pad.
China, Crystal, Some hand-painted utensils
Stoneware may discolor, fade or spot.
Hand wash these utensils.
Position fragile glassware so
that it will not topple over or
come in contact with other
utensils during the wash
cycle.
Glass Milk glass may discolor or
become yellow.
Non-stick Apply a light coating of
Coatings vegetable oil to non-stick
surfaces after drying.
Plastics Make sure the plasticware is
dishwasher-safe.
Stainless Steel, Load these so they do not
Sterling Silver come in contact with other
and Silver metals, stainless steel
Plates dishwasher tub walls or the
inner door.
13