Palmer PESM Solid Metal Manuel D'utilisation page 10

pANEL DESCRIpTION
1
LOw
This adjusts the low-end frequencies of the distorted sound.
2
MID
This adjusts the mid frequencies of the distorted sound.
3
MID FREq
This selects the midrange frequency adjusted by the MID control.
4
hI
This adjusts the high-end frequencies of the distorted sound.
5
DIST
This adjusts the amount of signal distortion.
6
VOLUME
This adjusts the output level of the distorted sound.
7
LED
When lit the pedal is switched on. Also serves as a battery level
indicator.
8
ON/OFF SwITCh
This determines whether the pedal is active or bypassed.
9
IN
Use a quality instrument cable with 1/4" jacks to plug your guitar
into this jack socket.
10