Palmer Pebut Manuel D'utilisation page 10

pANEL DESCRIpTION
1
CLEAN
This blends the boosted clean signal with the overdrive. All the
way down is overdrive only. All the way up is clean only. In be-
tween is a blend of both the clean and overdrive.
2
GAIN
This sets the gain level for the overdrive sound only. It has no
effect on the "clean" signal. Use low settings to warm up and com-
press your tone. Turn it up for your additional sustain and satura-
tion.
3
TONE
Turn this control up for a brighter sound and down for dark-
er tones. It is for the overdrive only and has no effect on the
"clean" signal.
4
LEVEL
This sets the output level. Plenty of juice is available to over-
drive your amp if desired.
5
LED
When lit the pedal is switched on. Also serves as a battery level
indicator.
6
ON/OFF SwITCh
This determines whether the pedal is active or bypassed.
7
IN
Use a quality instrument cable with 1/4" jacks to plug your bass
into this jack socket.
10 10 10