Connections; Stand Flange - LD Systems LDICOA12W Manuel D'utilisation

CONNECTIONS

INPUT
1
Input with speakON-compatible speaker socket (assignment 1+, 1-). The INPUT and OUTPUT sockets are wired in parallel
(2+, 2- are not used). The speaker has an impedance of 8 ohms.
OUTPUT
2
Output with speakON-compatible speaker socket (assignment 1+, 1-). When sending the speaker signal, please note the total impedance
of the system, in order to prevent damage to the connected amplifier.

STAND FLANGE

The speakers feature a stand flange with a stand insert for 0° (rear position) and 5° tilt angles (front position). Application examples: Use the stand
insert with 0° tilt angle for a standing audience and the 5° tilt angle for a seated audience.
1
2
5