Connections, Operating And Display Elements - LD Systems MAUI P900 Manuel D'utilisation

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS

1 MAIN
Setting the overall volume level. The subwoofer volume level is controlled by adjusting the SUB level control accordingly.
2 SUB
Setting the volume balance between the subwoofer and the column loudspeakers.
DISPLAY LEDS
3
POWER: Lights up when the device is properly connected to the mains and switched on.
SIGNAL: Lights up when the device is receiving an audio signal. The signal is received before the MAIN level control.
LIMIT: Lights up when the speaker system is being operated in its upper limit range. Brief illumination of the LED is not critical. To protect
the system, any excessive signal level is lowered smoothly by the integrated limiter. If the limiter LED remains lit for longer or permanently,
reduce the volume level. Failure to do so may result in distorted sound reproduction and damage the speaker system.
PROTECT: Lights up if the system is overloaded/overheating. The amplifiers are automatically muted. After reaching normal operating
conditions, the unit returns to the normal operating mode after a few minutes.
BLUETOOTH LED
4 ®
The MAUI P900 speaker system is equipped with Bluetooth technology, which means that audio files from another Bluetooth playback device
(e.g. smartphone) can be played back on the MAUI P900 speaker (under optimal conditions, the maximum distance between the two devices
is 70 metres). If there is no Bluetooth device connected to the internal Bluetooth unit, the blue Bluetooth LED will not indicate a signal. During
pairing, the LED flashes rhythmically at a frequency of approximately 3 Hz. If the Bluetooth LED lights up permanently, there is a Bluetooth
connection and playback can begin. The volume is controlled via the MAIN level or on the playback device.
HOLD TO LINK
5
To pair and connect the internal Bluetooth unit with a Bluetooth device, press and hold the HOLD TO LINK button for approximately 3
seconds until the Bluetooth LED flashes rhythmically (approx. 3 Hz). Enable Bluetooth on your playback device (e.g. smartphone) and search
on the user interface for available devices. Select "MAUI P900" and pair your Bluetooth device with the Bluetooth unit. Playback can now
be started. To end the connection, press and hold the HOLD TO LINK and the STEREO LINK buttons simultaneously for about 1 second. If the
Bluetooth connection is interrupted (e.g. range is exceeded), the Bluetooth LED goes out. Connection can be restored automatically within
approx. 90 seconds (Bluetooth device back in range). After 90 seconds, the connection can be restored with the Bluetooth playback device
(connect paired device). When using a single MAUI P900 system, a digital stereo signal is automatically summed in the Bluetooth module.
6 STEREO LINK LED
The MAUI P900 speaker system is equipped with a Bluetooth stereo link function (true wireless stereo), which means that if two MAUI P900
systems are used, stereo audio signals transmitted via Bluetooth can also be played back in stereo without a cable connection between the
two systems (the maximum distance between the two devices is 40 metres under optimal conditions). The system that is connected to the
Bluetooth playback device is hereinafter referred to as the master unit, the stereo expansion as a slave unit. If the master unit with the Bluetooth
playback device is connected to the slave unit, the blue Bluetooth LED and the green STEREO LINK LED on the master unit light up permanently.
6
1
3
4
5
2
7