Palmer PEHUR Root Effects Hurrigain Manuel D'utilisation page 10

pANEL DESCRIpTION
1
GAIN
This controls the amount of fuzz.
2
TONE
Turning this control clockwise increases the high frequency con-
tent.
3
VOLUME
This adjusts the output level of the effect sound.
4
LED
When lit the pedal is switched on. Also serves as a battery level
indicator.
5
ON/OFF SwITCh
This switch determines whether the pedal is "active" or "bypassed".
When "active" the red LED will be lit, when "bypassed" the LED will
not be lit.
6
IN
Use a quality instrument cable with 1/4" jacks to plug your guitar
into this jack socket.
7
OUT
Use a quality instrument cable with 1/4" jacks to connect this out-
put to the input of your guitar amplifier, or the next stomp box in
the signal chain.
8
9V DC INpUT
Connect an optional 9-Volt DC power supply to this socket. For
details please refer to "POWER REQUIREMENTS".
10