TDK-Lambda Alpha 1500 Mode D'emploi page 17

Alpha 1500 Handbook
Max Output Power: 1690W, 260AT
Ambient: 50degC max
Orientations: Horizontal Only
Model: CA1500 5BRP, 5SRP, 12FRP, 12FRP
Input voltage range: 150-264Vac
Outputs: 5.5V 25A max, 5.7V 85A max, 13V 33A max, 13V 33A max
Max Output Power: 1480W, 242AT
Ambient: 50degC max
Orientations: All except psu vertical with airflow downwards and psu upside down.
Model: CA1500 5A_MF, 3.3R, 2.5T, 24D, 12/12E (NS-LAM-212)
Input voltage range: 90-264Vac
Outputs: 5V 35A max, 3.3V 48A max, 2.5V 56A max, 24V 11A max, 12/12V 8/0.2A max
Max Output Power: 836W
Ambient: 50degC max
Orientations: All except psu vertical with airflow downwards and psu upside down.
Model: CA1500 5.1A_MF, 3.4R, 2.5T, 24.5D, 12.2/.12.2E
Input voltage range: 90-264Vac
Outputs: 5.1V 35A max, 3.4V 48A max, 2.5V 56A max, 24.5V 11A max, 12.2/12.2V 8/0.2A max
Max Output Power: 852W
Ambient: 50degC max
Orientations: All except psu vertical with airflow downwards and psu upside down.
Model: CA1500 24G_MF 24G_IN 24D_IN 24D_IN 24D_IN 24D_IN
Input voltage range: 90 - 264Vac
Outputs: 24V, 10A max, 24V, 20A max, 24V, 10A max, 24V, 10A max, 24V, 8A max, 24V, 8A max
Max Output Power: As per the Units Limitations table on page 1 of this handbook
Ambient: 50degC max.
Orientations: All except psu vertical with airflow downwards and psu upside down.
Model: CA1500 24G_MF 24G_IN 24D_IN 24D_IN 28D_IN 28D_IN
Input voltage range: 90 - 264Vac
Outputs: 24V, 10A max, 24V, 20A max, 24V, 10A max, 24V, 10A max, 28V, 8A max, 28V, 8A max
Max Output Power: As per the Units Limitations table on page 1 of this handbook
Ambient: 50degC max.
Orientations: All except psu vertical with airflow downwards and psu upside down.
Input Connections:
Brand
Amp Red
Amp Blue
Input tabs - 6.3mm x 0.8mm, tin plated brass, rated 22A.
Output Connections:
Output Connector Ratings:
1) 6.35mm fastons are rated at 15A.
2) 9.5mm Faston terminals are rated at 32A (Tab thickness = 1.0mm, suitable Faston terminals are AMP
151667-2 or AMP 280223-2)
3) M5 screw terminals are rated at 100A subject to the wire and wire connector used to connect them.
Maximum recommended torque setting for M5 screws is 2.4 – 2.6Nm.
Mating input faston connectors
Colour Wire size (awg)
22 - 18
16 - 14
Page 17 of 21
Part number
2-520407-2
3-520408-2
17032 issue 21, September 2018
Current rating
15A
15A