Turning the Power ON/OFF
Turning the Power ON
Make sure that the SmartMedia™ is correctly loaded. (
Set the mode dial to the desired mode.
When the camera is turned ON, the Auto Power OFF function starts
to work.
IMPORTANT
• If no operation is carried out for a fixed amount of time (default: about 1 minute), the power is turned
OFF to prevent battery wear. This is called "Auto Power OFF". To return to the normal state, either
change the mode dial or press the shutter down fully. (
About the Auto Power OFF Function
Turning the Power OFF
Set the mode dial to [
AUTO-OFF (page 72)
].
- 33 -
Page 29)
Page 37)