Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Using the Power Outlet

If you use the AC adapter in a room with a power outlet, you can take photographs for an extended period of time.
This also prevents failed photographs due to battery wear or failed transfer of data to a PC. For details on handling
the AC adapter, be sure to read page 14.
IMPORTANT
• Before you connect or disconnect the AC adapter, be sure to turn the camera OFF. If the AC adapter is
connected or disconnected with the power ON, the camera may malfunction or the recorded data may
be erased (destroyed) even if the batteries are loaded.
• The camera may not start normally if you connect the AC adapter not on the power off status. In this
case, turn the mode dial to OFF, then turn on again.
Open the connector cover 1 , and insert the AC
adapter connector plug into the DC IN 5V terminal on
the camera 2 .
Insert the AC adapter power plug into the power
outlet.
- 27 -
1
2

Publicité

Table des Matières
loading

Table des Matières