Erasing Images (Erase Frame) - Toshiba PDR-M21 Mode D'emploi

Erasing Images (Erase Frame)

Erases one image at a time.
Note, however, that images cannot be erased when they are protected ( Page 59) or the SmartMedia™ is write-protected ( Page 32).
Set the mode dial to [
When [ ] is selected, the last image frame appears on the LCD monitor.
When [
When [ ] is selected, the last image is selected.
Press the
Use the
ENTER button.
This erases the image and returns to the previous mode.
To cancel erasing of image data, select [CANCEL], and press the
ENTER button.
To continue erasing images, repeat the above
procedure from step 2.
Memo
• When [
• If you take a photograph after erasing an image, a number continuing from the last photographed
image is assigned as the image number.
] or [
] is selected, use the
erase button.
or buttons to select [OK], and press the
] is displayed on the LCD monitor, cancel the protection (
].
or buttons to select the image to be erased.
- 64 -
D L E E T E
K O
C ANCEL
Page 59).