Installation; Unpacking And Disposal Of Packaging Elements; Foot Mounting - Oceanic OCEACV130T6 Guide D'utilisation

1. Unpacking and disposal of packaging elements:

Your product must be unpacked and handled with care, to avoid any risk of deformation or
shock.
Make sure that all plastic parts do not touch the product.
 Packaging materials
- The packing box is recyclable.
- Materials marked with the symbol
> PE <= polyethylene; > PS <= polystyrene; PP = polypropylene; ...
This means that they can be recycled by disposing of them in appropriate collection
containers.
- The other packing elements (adhesive, fasteners ...) must be thrown away with household
waste.

2. Foot mounting:

Before plugging in your product, first install the feet:
- Put your convector flat or on its side on a flat surface covered with a soft cloth so as
not to damage the surface of the product.
- Fix the feet under the base by inserting the screws in the axis as shown in the figure
below, then straighten your convector.
III. INSTALLATION
are recyclable
24